How to Fine Tune a Sprinkler | Plumber in Leona Valley CA

How to Fine Tune a Sprinkler - Article by Antelope Valley Plumbing

Whenever the time comes when your lawn is not able to receive as much as it needs to survive, you should start opting to have water sprinklers installed on your lawn. This allows you to supplement the water needed by your lawn without the risk of over-watering or lacking the water supply needed. If you already have these sprinklers in your lawn, it is always best that you will give a fine tuning before you start using it again.

Most of the time, these sprinklers are not used during winter season allowing the irrigation system to malfunction while it is not in use. So, to start the tuning, here are some steps to follow:

• Check for any problems with the function of each sprinkler. It is best that you check each valve and search for any wet spots indicating leaks. Once you see some leaks, repair it immediately.
• Consider changing the batter of the controller when needed. You can check whether the sprinklers’ control battery is still working at its best when it still follows the scheduled time as well as the amount of water that should be sprayed throughout the lawn.
• Whenever you see the sprinklers leaning on the side or is not in its original position, it is best that you straighten it or fix it immediately. This will help in preventing any dry spot in your lawn and it will also help you with conserving water.
• As a sprinkler valve gets broken, replace it with the exact unit. This will ensure that it will fit in the valve circuit easily. Make sure that it is compatible with the circuit to make sure that it will function just like it was the original sprinkler that you have replaced.
• To ensure that the sprinkles will spray even amount of water throughout the lawn, it is necessary that you will clean the sprinkles continuously. What you can do to clean the filter is using an old toothbrush that to remove all debris that may block the flow of water. After cleaning reinstall it and test the spray pattern. If you do not have the time to clean the sprinklers, you can always replace it to save your time and effort.
• Adjust the sprinklers. To adjust the radius of the water sprayed as well as the mist, you just have to turn the screw to ensure that it will distribute even amount of water on your lawn. Furthermore, this will also help you with getting your sprinkles focused on the lawn and not on the sidewalks or walkways to your home.
• Never forget to test the sprinklers after each adjustment to make sure that it has the right spray pattern you are trying to get for your lawn. As you learn to do the entire tuning process for your sprinklers, you are assured that you can always maintain these valves in its best conditions. Moreover, this will also help you with saving water since your sprinklers are distributing enough amount to cover the entire lawn area.

http://www.antelopevalleyplumbing.com/